S Series
The general-purpose, polyester-based S Series of Elastollan TPUs was developed to offer good hydrolytic stability and very good resistance to oil, fuel and solvents. Products in the S Series are versatile enough to be injection molded, blow molded and extruded to meet your needs, and they can also be formulated to meet specific certifications.
The S Series also provides the benefits of:
- Weather (UV) resistance
- Resistance to high temperatures
- Abrasion resistance
Download the Certification Sheet
Challenge us!
Need help deciding if the Elastollan S Series is appropriate for your needs? Just contact BASF electronically at tpu_techdesk@basf.com or call us at 1-800-892-3111, and one of our TPU experts will be able to provide insight on how Elastollan can address your requirements.
| Products | Shore Hardness (A/D) ASTM D-2240 |
Specific Gravity (g/cm3) ASTM D-792 |
Tensile Strength (psi, MPa) ASTM D-412 |
Tensile Stress @ 100% Elongation (psi, MPa) ASTM D-412 |
Elongation @ Break % ASTM D-412 |
Tear Strength (lb/in, N/mm) ASTM D-624, Die C |
Taber Abrasion /mg loss 1000g & H18 Wheel mg ASTM D-1044 |
| S60D | 60D | 1.25 | 6200, 42.8 | 3200, 22.1 | 450 | 1150, 202 | 50 |
| S85A | 85A | 1.22 | 4900, 33.8 | 1000, 6.9 | 690 | 590, 104 | 25 |
| S90A | 92A | 1.23 | 5600, 38.6 | 1550, 10.7 | 540 | 730, 128.5 | 25 |
| S95A | 96A | 1.23 | 6100, 42.1 | 2000, 13.8 | 510 | 875, 154 | 30 |
| S98A | 98A/54D | 1.24 | 6100, 42.1 | 2700, 18.6 | 425 | 1050, 185 | 50 |
- General Information