B Series

Designed specifically for high-performance injection molding and extrusion, the Elastollan B Series contains a hydrolysis stabilizer and has excellent mechanical properties, and products in the series can also be formulated to meet specific certifications. Among these properties is an especially impressive ability to retain elasticity after being in tension (low tensile set).

 

The B Series is polyester-based, so it also provides superior:

  • Abrasion resistance
  • Toughness
  • Hydrolytic stability
  • Resistance to heat, oil, fuel and solvents

 

 Download the Certification Sheet

 

Challenge us!

Need help deciding if the Elastollan B Series is appropriate for your needs? Just contact BASF electronically at tpu_techdesk@basf.com or call us at 1-800-892-3111, and one of our TPU experts will be able to provide insight on how Elastollan can address your requirements.

Physical
Properties		 Shore
Hardness
(A)
ASTM D-2240		 Shore
Hardness
(D)
ASTM D-2240		 Specific
Gravity
(g/cm3)
ASTM D-792		 Tensile
Strength
(psi, MPa)
ASTM D-412		 Tensile Stress
@ 100% Elongation
(psi, MPa)
ASTM D-412		 Elongation
@ Break
%
ASTM D-412		 Tear
Strength
(lb/in, N/mm)
ASTM D-624, Die C		 Taber Abrasion
/mg loss
1000g & H18 Wheel
mg
ASTM D-1044
B60D   57 [1] 1.23 7975, 55 2320, 16 500 850, 150 45
B80A 82   1.19 [2] 7252, 50 [3] 725, 5 [3] 600  [3] 485, 85 [4]  
B85A 83   1.20 7975, 55 580, 4 600 425, 75 40
B90A 91 [1] 42 [1] 1.21 [2] 7975, 55  [3] 1015, 7  [3] 550  [3] 514, 90 [4]  
B95A 96   1.22 7975, 55 1450, 10 500 568, 100 40

 

TEST METHOD
[1] DIN 53505
[2] DIN EN ISO 1183-1-A
[3] DIN 53504-S2
[4] DIN ISO 34-1Bb