1100 Series

Elastollan 1100 Series polyether-based TPUs can be used for a variety of processes, including injection molding, blow molding and extrusion. Products within this series are available in hardnesses ranging from 70A to 64D, as well as in grades that are UV stabilized, flame retardant and FDA-compliant. 1100 Series products can also meet a variety of certifications and USP Class VI and NSF 61 standards.

 

Other 1100 Series advantages include:

  • Very good transparency
  • Impressive resistance to weak acids/bases
  • Excellent low-temperature flexibility properties
  • Outstanding hydrolytic stability
  • Excellent microbial resistance

 

 Download the Certification Sheet

 

Challenge us!

Need help deciding if the Elastollan 1100 Series is appropriate for your needs? Just contact BASF electronically at tpu_techdesk@basf.com or call us at 1-800-892-3111, and one of our TPU experts will be able to provide insight on how Elastollan can address your requirements.

Physical
Properties		 Shore
Hardness
(A)
ASTM D-2240		 Shore
Hardness
(D)
ASTM D-2240		 Specific
Gravity
(g/cm3)
ASTM D-792		 Tensile
Strength
(psi, MPa)
ASTM D-412		 Tensile Stress
@ 100% Elongation
(psi, MPa)
ASTM D-412		 Elongation
@ Break
%
ASTM D-412		 Tear
Strength
(lb/in, N/mm)
ASTM D-624, Die C		 Taber Abrasion
/mg loss
1000g & H18 Wheel
mg
ASTM D-1044
1154D   53 1.16 5800, 40 2900, 20 460 1025, 179.5 75
1154 FHF   58 [1] 1.27 [2] 4351, 30 [3] 2756, 19 [3] 400 [3] 628, 110 [4]  
1164D   64 1.18 6000, 41 3600, 25 425 1250, 220 55
1174D   73 1.19 6500, 45 4600, 32 350 1450, 225 75
1175AW 75 [1]   1.14 [2] 6000, 41 [3] 700, 4.8 [3] 685 [3] 325, 57 [4] 20
1180A 80   1.11 4700, 32 800, 5.5 600 515, 90 25
1185A 86   1.12 4950 ± 150,
34 ± 1		 1100, 7.6 580 ± 60 570 ± 30,
100 ± 5		 30
1185A (FILM) 86   1.12 7500, 52 1100, 8 570 500, 88 25
1185A F001 87   1.29 4200, 29 1300, 9 500 550, 96 96
1185A FHF 88   1.23 5300, 36 1550, 11 500 550, 96 35
1185AW 83   1.16 7500, 38 850, 5.9 595 500, 88 35
1190A 91   1.13 5300, 37 1500, 10 575 715, 125 45
1195A 95   1.14 5200, 36 1750, 12 490 800, 140 55
1195 (FILM) 95   1.14 7000, 48 2400, 16 450 800, 140 45

 

TEST METHOD
[1] DIN 53505
[2] DIN EN ISO 1183-1-A
[3] DIN 53504-S2
[4] DIN ISO 34-1Bb